Set a mouse trap in seconds.
Learn how to set a mouse trap using the Safety Wedge. Choose your trap style below and follow the step-by-step instructions.
Always keep your hand behind the red line and use the designated safe area.
How to set a mouse trap with a square bait flap
-
1
Bait the trap
Apply your preferred bait to the trap before beginning the setup.
-
2
Engage the trap
Pull and hold the square metal hammer down with one hand. Place the end of the holding bar into the small square opening at the back of the bait trigger flap.
-
3
Position the Safety Wedge
Hold the Safety Wedge with the safe area on top and your hand behind the red line. Slide the wedge under the bait flap until the nub on the bottom of the wedge rests against the trap with slight pressure.
-
4
Release the hammer
Once the Safety Wedge is positioned correctly, remove your hand from the metal hammer.
-
5
Remove the wedge
Slide the Safety Wedge back from underneath the bait flap.
The trap is now set.
How to set a mouse trap with a metal clip bait trigger
-
1
Bait the trap
Prepare the trap with your preferred bait.
-
2
Pull back the hammer
Pull back and hold the square metal hammer down with one hand.
-
3
Position the holding bar
Place the curved end of the holding bar against the side and underneath the small catch on the metal bait clip.
-
4
Position the Safety Wedge
Hold the Safety Wedge sideways with your hand behind the red line. Place the holding bar into the small groove on the wedge using light pressure.
-
5
Release and remove
Once the holding bar is securely positioned underneath the bait clip catch, remove your hand from the metal hammer. Pull back and remove the Safety Wedge.
The trap is now set.
A safer way to set a snap trap.
No complicated equipment. No makeshift tools. Just a simple wedge designed to help you keep your hands clear while setting your trap.